OAR 330-091-0120
Preliminary Certificate Application Requirements
(1)
Eligible facilities(a)
The Department may issue only one Manufacturing BETC for each separate and distinct facility under these rules.(b)
A proposed facility must meet applicable codes and standards.(2)
Required information(a)
Persons requesting a Manufacturing BETC shall apply on the Department-approved form for a preliminary certificate. In addition to the information required in ORS 469.205, the applicant shall provide the following information:(A)
The name, address, and phone number of the applicant, owners of the facility, and the developers of the project.(B)
The applicant’s federal tax identification number or social security number which may be shared with the Department of Revenue to facilitate the administration of the state tax law.(C)
Proposed facility start date and date estimated for the commencement of operation. A facility’s start date is the date that the project applicant financially commits to the project. Financial commitment includes, but is not limited to: making a down-payment or deposit, signing a contract with a vendor, ordering material or equipment, beginning construction or installation.(D)
The proposed facility location within the geographical confines of Oregon.(E)
Information demonstrating that the proposed facility will comply with or have a variance from the land use laws of the city or county where the facility will be located.(F)
Information demonstrating that the proposed facility will comply with all other local, federal, and state laws.(G)
A list of appropriate authorizations for all work performed including but not limited to appropriate licenses, permits, or other authorizations that are required by state or local jurisdiction for the facility.(H)
Information demonstrating the intended operation, maintenance and use of the facility, including but not limited to: the amount and type of jobs potentially created in the construction, installation and operation of the facility in Oregon, the benefits of the facility with regard to overall economic activity in this state and a demonstrated intent that the facility will be maintained and operated for at least five years after the facility is operational. If an applicant expects that a facility will operate less than five years, the applicant may submit a request for approval of the shorter operating period as part of their application for preliminary certification. This request shall include information describing the proposed facility and supporting the proposed operating period. The Director will determine whether to approve the shorter operating period and may include conditions, reductions or other limits on any potential tax credits.(I)
A declaration from the applicant that all property taxes for the facility have been paid and there are no delinquent property taxes associated with the facility.(J)
Information that demonstrates that the facility will be used solely to manufacture equipment, machinery or other products that will be used exclusively for renewable energy resource facilities. An applicant shall provide sufficient information relating to the specific characteristics of the equipment, machinery or other products that demonstrate how such equipment, machinery or other products will be used exclusively for renewable energy resource facilities and not for other commercial purposes. In the case of a facility manufacturing Electric Vehicles under the all-terrain-vehicles standards, an applicant shall provide information that demonstrates that the vehicles will be used for agricultural, commercial, industrial or governmental purposes.(b)
The Department may request additional information from the applicant in order to determine whether multiple applications have been made for the same facility. The department will make its determination based on the following:(A)
All applications under consideration will be reviewed against other current applications, facilities that have received preliminary certification and facilities that have received final certification within the past 12 months. Further review shall be given to applications which when combined exceed the annual limit for a tax credit found in ORS 469.200.(B)
Applications will be considered a single facility unless each phase of development or each expansion of or addition to existing facilities or production lines can be demonstrated to meet, through increased production and number of jobs created, the requirements of ORS 469.197 (4) and these rules.(c)
Anticipated capital expenditures and other costs as defined in these rules for the erection, construction, installation or acquisition of the proposed facility and its expected operational life.(d)
The payment required by OAR 330-091-0150 (Budget Limits and Payments)(3).(e)
For a proposed renewable energy resource equipment manufacturing facility:(A)
The applicant shall demonstrate that they can meet ORS 469.197(4)(c) through (f) by:(i)
Describing the minimum level of direct employment that will be provided by the facility during each of the tax years in which the tax credit will be claimed and by describing the anticipated average annual direct employment during each of those years, including the number of average hourly and annual wages of employees by employment classifications by geographic location. The applicant must also describe actions it will take to achieve cultural diversity in its work force.(ii)
Demonstrating its financial ability to construct and operate the proposed facility through documentation such as independent credit ratings; credit references, including letters from banks or other financial institutions attesting to the applicant’s credit worthiness; and other documentation demonstrating the applicant’s financial viability.(iii)
Demonstrating that the facility will achieve long-term operation and success by documenting the qualifications, capabilities and experience of the applicant in the construction and operation of such facilities, the long-term commercial and technical viability of the renewable energy resources manufacturing equipment and the renewable energy resource facilities for which the equipment is produced.(iv)
Certifying that allowance of the tax credit is integral to the decision to expand or locate the facility in Oregon.(v)
Before the Director will approve a final certification, the Department may require the applicant to enter into a performance agreement or other similar agreement for the facility. Failure to comply with the terms of the performance agreement or other similar agreement may be the basis for denial or revocation of the final certification pursuant to OAR 330-091-0133 (Final Certification).(B)
Any other information necessary to find that a proposed facility complies with ORS 469.185 to 469.225 and these rules.(C)
In considering such applications, the Director may consult with other state agencies.(D)
The Director must find that:(i)
The applicant has demonstrated that it has a reasonable likelihood of achieving the minimum level of employment proposed and that such employment will contribute to public benefit, based on the number of average hourly and annual wages of employees including benefits by employment classifications by geographic location, and actions to achieve cultural diversity in its workforce.(ii)
The applicant has a reasonable likelihood of being financially viable based on its credit ratings and references from banks and financial institutions attesting to its credit worthiness.(iii)
The applicant has the organizational expertise as demonstrated by qualifications and experience to construct and operate the proposed facility.(iv)
The renewable energy resource equipment and the renewable energy resource facilities for which the equipment is produced have the commercial and technical viability to have a reasonable likelihood to achieve long-term success.(v)
The facility will contribute to a diversified portfolio of renewable energy resource equipment manufacturing facilities.(vi)
The applicant has certified that allowance of the tax credit is integral to the decision to expand or locate in Oregon.(3)
Standards When Reconstructing a Facility: If a facility is reconstructed and an application for preliminary certification is filed seeking a tax credit on the reconstructed facility, any tax credit certified for the reconstructed facility will be reduced by the amount of the original tax credit remaining for the original facility.(4)
Eligible Costs:(a)
A Manufacturing BETC may be granted based on the eligible costs of a facility that is used to manufacture equipment, machinery or other products that will be used exclusively for renewable energy resource facilities.(b)
Subject to the facility cost limitations of OAR 330-091-0150 (Budget Limits and Payments)(1)(a) and the provisions of 330-091-0120 (Preliminary Certificate Application Requirements)(4), eligible costs include any land purchase costs, structures, buildings, installations, excavations, machinery, equipment or devices, or any addition, reconstruction or improvements to land or existing structures, buildings, installations, excavations, machinery, equipment or devices, necessarily acquired, constructed or installed by a person in connection with the conduct of a trade or business, that is used to manufacture the equipment, machinery or other products that will be used exclusively for renewable energy resource facilities.(A)
Eligible costs do not include any costs of any land purchase costs, structures, buildings, installations, excavations, machinery, equipment or devices, or any addition, reconstruction or improvements to land or existing structures, buildings, installations, excavations, machinery, equipment or devices that have been subject in whole or in part to the facility cost limitation of OAR 330-091-0150 (Budget Limits and Payments)(1)(a) if such costs would exceed that cost limitation.(B)
Eligible costs do not include costs of a facility that is used to manufacture equipment, machinery or other products not used exclusively for renewable energy resource facilities.(C)
An application must demonstrate compliance with these provisions to be accepted, including clearly describing the specific characteristics of the equipment, machinery or other products that demonstrate why such equipment, machinery or other products will be used exclusively for renewable energy resource facilities and not for other commercial purposes and therefore why the costs of such of such equipment, machinery or other products are eligible costs.(5)
If the Department determines that the applicant qualifies for a Manufacturing BETC, the Department may issue a preliminary certification. The preliminary certification may contain specific criteria and conditions for the facility to meet in order to obtain a final certification based on the information provided in the application for the Manufacturing BETC and type of facility that is described in the application. In addition, the Department may require the applicant to enter into a performance agreement or other similar agreement as a condition of approval.
Source:
Rule 330-091-0120 — Preliminary Certificate Application Requirements, https://secure.sos.state.or.us/oard/view.action?ruleNumber=330-091-0120.