OAR 340-225-0030
Procedural Requirements


When required to conduct an air quality analysis under this division:

(1)

The owner or operator of a source must submit a modeling protocol to DEQ and have it approved before submitting a permit application; and

(2)

In addition to the requirements defined in OAR 340-216-0040 (Application Requirements) for permit applications, the owner or operator of a source must submit all information necessary to perform any analysis or make any determination required under this division. Such information may include, but is not limited to:

(a)

Emissions data for all existing and proposed emission points from the source or modification. This data must represent maximum emissions for the averaging times by regulated pollutant consistent with the ambient air quality standards in OAR 340 division 202.

(b)

Stack parameter data, height above ground, exit diameter, exit velocity, and exit temperature, for all existing and proposed emission points from the source or modification;

(c)

An analysis of the air quality and visibility impact of the source or modification, including meteorological and topographical data, specific details of models used, and other information necessary to estimate air quality impacts; and

(d)

An analysis of the air quality and visibility impacts, and the nature and extent of all commercial, residential, industrial, and other source emission growth, that has occurred since the baseline concentration year in the area the source or modification would significantly affect.
NOTE: This rule is included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-020-0040

Source: Rule 340-225-0030 — Procedural Requirements, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=340-225-0030.

Last Updated

Jun. 8, 2021

Rule 340-225-0030’s source at or​.us