OAR 437-007-0900
General Landing Work Practices
(1)
Before starting or moving any machine, the operator must determine that personnel are in the clear.(2)
When vehicles or machines are moved within the landing area all personnel must:(a)
Stay in the clear of the vehicle(s) or machine(s).(b)
Inform the operator of the intent to approach or be near the vehicle(s) or machine(s).(c)
Wait for the operator’s permission to approach or be near the vehicle(s) or machine(s).(3)
Personnel must not approach the hazardous pinch point area created by the rotation of the machine’s superstructure without:(a)
Informing the operator of that intent.(b)
Receiving acknowledgment from the operator that the person’s intention is understood.(c)
The machine being stopped while personnel are within the hazardous area.(4)
Any tool or rigging that is not being used must be stored in a location where it will not create a hazard.(5)
Materials must not be pushed, thrown or dumped off the landing in a manner or at a time that will endanger personnel.(6)
Personnel must not brand, mark, buck, limb or trim logs in a location that will expose them to contact with moving lines, logs, rigging, machines, equipment or vehicles.(7)
Logs must not be placed in, moved about, or removed from the bucking area of the landing unless all personnel are in the clear.(8)
Tongs must not be carried over both shoulders with the tong points around the neck.
Source:
Rule 437-007-0900 — General Landing Work Practices, https://secure.sos.state.or.us/oard/view.action?ruleNumber=437-007-0900
.