OAR 813-060-0032
Manufactured Dwelling Park Projects
(1)
To qualify as a Manufactured Dwelling Park, the Project shall comply with the following standards and conditions:(a)
Site, design and licensing standards of the local government;(b)
Regulations of the Building Codes Division, State of Oregon, OAR 918-600-0010 (Scope) to 918-600-0110;(c)
All manufactured dwellings shall have skirting, unless the home is set on a ground level foundation. If the manufactured dwelling is purchased after September 4, 1984, the design, color and texture of the skirting shall appear to be an integral part of the adjacent exterior wall of the manufactured dwelling;(d)
All manufactured dwellings purchased after September 4, 1984, shall have a roof with a non-reflective surface at a minimum slope of two inches in 12 inches (16 percent);(e)
The area occupied by the manufactured dwelling and any accessory buildings (including porches, carports, etc.) shall not exceed 40 percent of the lot area; and(f)
All manufactured dwellings shall be installed in compliance with the State of Oregon, Building Codes Division regulations. Installation inspections shall be completed by the Building Codes Division, or by a city or county which has contracted to do the inspections. A copy of the final inspection report shall be submitted to the Department together with a copy of a certificate of occupancy.(2)
The Borrower shall establish rules for the residents of the Project, to be a required part of each resident’s lease. The rules and lease shall be submitted for the Department’s review and approval as part of the proposal.
Source:
Rule 813-060-0032 — Manufactured Dwelling Park Projects, https://secure.sos.state.or.us/oard/view.action?ruleNumber=813-060-0032.