OAR 918-674-0060
Compliance Control Programs


(1)

The Division’s Compliance Control inspection services are maintained by the Division in accordance with the in-plant inspection procedure, and requires:

(a)

That all permits be obtained before delivery of any unit to a building site; and

(b)

That when required by local ordinance all prefabricated structures meet the requirements of the Oregon Structural Specialty Code or the Oregon One and Two Family Dwelling Specialty Code establishing standards for mitigation of wild fires.

(2)

Manufacturer Compliance Control: Upon application the Division may approve a prefabricated structure manufacturer’s compliance control program using employees who hold the appropriate Division inspection certifications:

(a)

Application for manufacturer’s compliance control approval shall be in writing and shall include a complete compliance control manual containing administrative, construction and program control procedures for the compliance control program; and

(b)

The name of the manufacturer’s designated compliance control officer responsible for the compliance control program and whose responsibility shall include maintaining records of the inspection program, copies of all plans and technical reports approved by the Division;

(c)

Authority to use, apply and continue to use the Division’s insignia is contingent upon the manufacturer’s compliance with the approved compliance control standards and procedures, and upon compliance with all applicable laws and rules;

(d)

An approved compliance control manual stamped with the Division’s approval stamp, shall be maintained by the manufacturer’s compliance control officer, and a copy filed with the Division;

(e)

When it is demonstrated that a manufacturer can no longer assure compliance with the Oregon Specialty Codes, these rules, or its compliance control manual, the Division may rescind the manufacturer’s compliance control approval and return to Division inspections.
[Publications: Publications referenced are available from the agency.]

Source: Rule 918-674-0060 — Compliance Control Programs, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=918-674-0060.

918‑674‑0000
Application, Scope and Purpose
918‑674‑0005
Definitions
918‑674‑0013
Manufacturer Registration
918‑674‑0015
Responsibility for Services
918‑674‑0023
Codes and Standards
918‑674‑0025
Plumbing Exception
918‑674‑0033
Specific Use Structures
918‑674‑0038
Installations
918‑674‑0043
Reciprocity
918‑674‑0055
Inspections
918‑674‑0057
Alternative Inspection Pilot Program
918‑674‑0060
Compliance Control Programs
918‑674‑0065
Plan Requirements
918‑674‑0075
Out-of-State Applicant
918‑674‑0085
Plan Approval, Renewal and Expiration
918‑674‑0090
Changes to Approved Plans
918‑674‑0095
Transfer of Approvals
918‑674‑0100
Change of Name or Address, or Ownership
918‑674‑0105
Production Discontinued by Manufacturer
918‑674‑0115
Compliance and Right of Entry
918‑674‑0125
Proprietary Material
918‑674‑0130
Insignia(s) of Compliance Required
918‑674‑0135
Lost or Damaged Insignia of Compliance
918‑674‑0145
Unit Identification
918‑674‑0150
Components
918‑674‑0155
State Fees
918‑674‑0200
Third-Party Inspection and Plan Review
918‑674‑0210
Third-Party Certification Application
918‑674‑0220
Inspector Certification Requirements
918‑674‑0230
Insurance Requirements
918‑674‑0240
Conflict of Interest and Collusion
918‑674‑0250
Contractual Agreements
918‑674‑0260
Third-Party Certification Renewal
918‑674‑0270
Revocation of Third-Party Certification and Appeal Process
918‑674‑0280
Record Keeping Requirements
918‑674‑0290
Reporting Requirements
918‑674‑0300
Monitoring of Third Parties
Last Updated

Jun. 8, 2021

Rule 918-674-0060’s source at or​.us