OAR 257-040-0020
Return of a Device to a Distributor

(1)

On the return of a device to a distributor, the distributor must:

(a)

Test the device for minimum power and so indicate on the user log;

(b)

Visually inspect the device for external signs of damage and so indicate on the user log;

(c)

Visually inspect the seal on the device and record the seal number on the user log;

(d)

Enter his or her initials on the “Check In Procedures” portion of the user log.

(2)

These rules impose only minimum requirements. Nothing in theses rules is intended to prevent distributors from using additional forms, agreements or leases, or from requiring compensation for use of the devices.

(3)

Distributor may use their own instructions, forms, logos and letterheads as written device instructions, user’s fact sheets and users logs. However, any user’s fact sheets and user logs shall contain, as a minimum, the information set forth in Exhibits 1 and 2, which are incorporated into theses rules.
[ED. NOTE: Exhibits referenced are available from the agency.]

Source: Rule 257-040-0020 — Return of a Device to a Distributor, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=257-040-0020 (accessed May 26, 2025).

May 26, 2025

Rule 257-040-0020's source at or​.us