OAR 340-230-0150
Solid and Infectious Waste Incinerators: Compliance
(1)
All waste incinerators constructed or modified before March 13, 1990 must demonstrate compliance with the applicable provisions of OAR 340-230-0100 (Solid and Infectious Waste Incinerators: Best Available Control Technology) through 340-230-0150 (Solid and Infectious Waste Incinerators: Compliance) by March 13, 1995, or by the date required by applicable federal guidelines adopted by the Environmental Protection Agency, whichever is sooner. Existing data such as that collected in accordance with the requirements of an Air Contaminant Discharge Permit may be used to demonstrate compliance.(2)
Solid waste incinerators and infectious waste incinerators constructed or modified on or after March 13, 1990 must demonstrate compliance with the emission limits and operating requirements of OAR 340-230-0100 (Solid and Infectious Waste Incinerators: Best Available Control Technology) through 340-230-0150 (Solid and Infectious Waste Incinerators: Compliance) in accordance with a schedule established by the Department before commencing regular operation.(3)
Compliance with OAR 340-230-0100 (Solid and Infectious Waste Incinerators: Best Available Control Technology) through 340-230-0150 (Solid and Infectious Waste Incinerators: Compliance) does not relieve the owner or operator of the source from the responsibility to comply with requirements of the Department’s Solid and Hazardous Waste rules, OAR 340, division 61, regarding the disposal of ash generated from waste incinerators.
Source:
Rule 340-230-0150 — Solid and Infectious Waste Incinerators: Compliance, https://secure.sos.state.or.us/oard/view.action?ruleNumber=340-230-0150
.