OAR 340-248-0205
Emission Standards and Procedural Requirements: General Provisions


(1)

A person may not openly accumulate friable asbestos material or asbestos-containing waste material.

(2)

Contractors working on asbestos abatement projects at secure facilities must ensure that all security clearance requirements are completed before asbestos abatement projects at secure facilities start so that DEQ inspectors may gain immediate access to perform required asbestos project inspections.

(3)

A person may not sand, grind, saw, or abrade asbestos-containing material unless during such activity the material is handled and disposed of as friable asbestos material as this division provides.

(4)

The content of asbestos in asbestos-containing material must be determined using the method specified by the Environmental Protection Agency as listed in EPA/600/R-93116, July 1993, “Method for the Determination of Asbestos in Bulk Building Materials” or another substantially similar method approved by DEQ. Bulk samples must not be composited for analysis.
[ED. NOTE: To view attachments referenced in rule text, click here to view rule.]

Source: Rule 340-248-0205 — Emission Standards and Procedural Requirements: General Provisions, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=340-248-0205.

340‑248‑0005
Applicability
340‑248‑0010
Definitions
340‑248‑0100
Licensing and Certification Requirements: Applicability
340‑248‑0110
Licensing and Certification Requirements: General Provisions
340‑248‑0120
Licensing and Certification Requirements: Contractor Licensing
340‑248‑0130
Licensing and Certification Requirements: Certification
340‑248‑0140
Licensing and Certification Requirements: Training Provider Accreditation
340‑248‑0150
Licensing and Certification Requirements: General Training Standards
340‑248‑0160
Licensing and Certification Requirements: Prior Training
340‑248‑0170
Licensing and Certification Requirements: Reciprocity
340‑248‑0180
Licensing and Certification Requirements: Fees
340‑248‑0205
Emission Standards and Procedural Requirements: General Provisions
340‑248‑0210
Emission Standards and Procedural Requirements: Asbestos Requirements for Mills, Roadways and Parking lots, and Manufacturing Operations
340‑248‑0220
Emission Standards and Procedural Requirements: Reporting Requirements for Asbestos Sources Using Air Cleaning Devices
340‑248‑0230
Emission Standards and Procedural Requirements: Asbestos to Nonasbestos Conversion Operations
340‑248‑0240
Emission Standards and Procedural Requirements: Asbestos Inspection Requirements for Oregon Title V Operating Permit Program Sources
340‑248‑0250
Emission Standards and Procedural Requirements: Exemptions
340‑248‑0260
Emission Standards and Procedural Requirements: Asbestos Abatement Notification Requirements
340‑248‑0270
Emission Standards and Procedural Requirements: Asbestos Work Practices and Procedures
340‑248‑0275
Emission Standards and Procedural Requirements: Asbestos Standards for Air Cleaning, Spraying, Molded Insulation, and Fabricating
340‑248‑0280
Emission Standards and Procedural Requirements: Asbestos Disposal Requirements
Last Updated

Jun. 8, 2021

Rule 340-248-0205’s source at or​.us