OAR 918-305-0100
Adoption of Oregon Electrical Specialty Code

(1) The Oregon Electrical Specialty Code is adopted pursuant to OAR chapter 918, Division 8.
(2) Effective April 1, 2021, the 2021 Oregon Electrical Specialty Code consists of the following:
(a) 2020 Edition of the NFPA 70, National Electrical Code (NEC), and as further amended by the division in OAR 918-305-0105 (Amendments to the Oregon Electrical Specialty Code) Table 1-E;
(b) 2017 Edition of the IEEE C2-2017, National Electrical Safety Code (NESC); and
(c) The electrical provisions of the Oregon Elevator Specialty Code adopted in OAR 918-400-0455 (Adopted Oregon Elevator Specialty Code).
(3) In the event of a conflict between the NEC and NESC requirements, the NEC requirement, as amended in subsection (2) of this rule, applies.
(4) As used in this rule:
(a) “ANSI” is the American National Standards Institute;
(b) “ASME” is the American Society of Mechanical Engineers;
(c) “IEEE” is the Institute of Electrical and Electronics Engineers; and
(d) “NFPA” is the National Fire Protection Association.
[Publications: Publications referenced are available from the agency.]

Source: Rule 918-305-0100 — Adoption of Oregon Electrical Specialty Code, .

Last Updated

Jun. 8, 2021

Rule 918-305-0100’s source at