OAR 257-100-0035
Statewide Service Center Area Requirement

(1) A manufacturer’s representative must maintain a network of certified service centers to be certified as a service center. A network of certified service centers must include all of the following;
(2) A minimum of one service center must be located in each lettered region, illustrated on the “Oregon IID Regional Map”;
(3) Regardless of how many service centers are located within a single lettered region, only one service center may represent the lettered region as required by this rule.
(4) The manufacturer’s representative must notify OSP within ten business days if a service center ceases operations. If a service center closure results in failure to meet the regional requirements of the service network, the manufacturer’s representative has 120 days to establish a new service center to meet the Service Center Area Requirement. If the manufacturer’s representative has not established a new service center in the closed service center region within 120 days of the service center’s closure, the manufacturer’s representative must have all device models uninstalled in accordance with OAR 257-100-0020 (Removal from List of Qualified Ignition Interlock Devices) and OAR 257-100-0065 (Removal of Ignition Interlock Devices).
(5) OSP may revoke certifications for all certified service centers within the manufacturer’s representative’s network if a manufacturer’s representative fails to meet the service center area requirements.
(6) All service centers must be located in the state of Oregon.
(7) Any manufacturer’s representatives that continue to meet the certified service center requirement in accordance with ODOT’s statewide service center map as of July 1, 2019, will have until January 1st, 2021 to meet this statewide requirement set out in (2) above.
[Publications: Publications referenced are available from the agency.]

Source: Rule 257-100-0035 — Statewide Service Center Area Requirement, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=257-100-0035.

Last Updated

Jun. 8, 2021

Rule 257-100-0035’s source at or​.us