OAR 437-002-0022
Additional Oregon General Requirements

(1)

Scope and application. This rule applies in addition to those in Division 2/D Walking-Working Surfaces.

(2)

Barriers. The employer must ensure:

(a)

Protective barriers or suitable guards are erected when covers over openings are removed or excavations made in places accessible to vehicular or pedestrian traffic. Warning lights or flares shall be displayed if work is being done at night. These protective measures shall be maintained until permanent or adequate covers or barricades are in place or the hazard removed.

(b)

A watchperson is stationed where temporary conditions do not permit safeguarding of employees through the use of warning signs, lights, protective barriers, or covers.

(3)

Plant Arrangement. The employer must ensure:

(a)

Provisions for safety (such as adequate work and storage space for the full needs of raw, in-process, and finished materials, and for machinery, equipment and operations) are included in plant design, layout, and operation.

(b)

A vertical clearance of not less than 6 1⁄2 feet is provided over work areas. Where it is otherwise impractical to secure adequate head room, overhead obstructions may be padded or may be indicated by means of contrasting paint, telltales, or similar means, if such means will furnish adequate protection.

(c)

Work platforms provided shall be of sufficient width to provide a safe working space.

(4)

Aisles, Passageways, Walkways, Inclines. The employer must ensure:

(a)

Aisles, passageways, and walkways are of adequate width for their intended or actual use, and in no event shall they be less than 22 inches wide.

(b)

Fixed inclined walkways are not less than 22 inches wide, inclined at no greater angle than 24 degrees, and are securely fastened at the top and bottom.

(c)

Moveable inclined walkways which extend to floats or floating equipment (except to vessels under Federal jurisdiction) are not less than 20 inches wide, and are secured at the upper end only with clear space provided for the lower end to adjust automatically with the heights of water.

(d)

An adequate antislip surface is applied to inclined walkways whenever the gradient so warrants. Adequate cleats secured at uniform intervals not to exceed 18 inches, and extending the full width of the walkway when practical, may be used for this purpose.

(e)

Inclines extending from floor to floor which are used instead of stairways have standard railings in accordance with the requirements in 1910.29(b).

(f)

In addition to the surface conditions in 1910.22(a)(3), aisles, passageways, walkways, and inclines are maintained free of holes, unevenness, or any unnecessary obstructions or debris that may create a hazard.

Source: Rule 437-002-0022 — Additional Oregon General Requirements, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=437-002-0022.

437‑002‑0005
Adoption by Reference 437‑002‑0006
General Oregon Definitions 437‑002‑0007
Testing and Certification 437‑002‑0010
Adoption by Reference 437‑002‑0015
Adoption by Reference 437‑002‑0020
Adoption by Reference 437‑002‑0022
Additional Oregon General Requirements 437‑002‑0026
Portable Ladders 437‑002‑0032
Ramps and Runways 437‑002‑0033
Piers and Wharves 437‑002‑0040
Adoption by Reference 437‑002‑0041
Exits and Exit Routes 437‑002‑0042
Emergency Action Plan 437‑002‑0043
Fire Prevention Plan 437‑002‑0047
Working Near Overhead High Voltage Lines and Equipment 437‑002‑0060
Adoption by Reference 437‑002‑0080
Adoption by Reference 437‑002‑0081
Oregon Ventilation Regulations 437‑002‑0095
Audiometric Testing in Oregon 437‑002‑0098
Additional Applicability 437‑002‑0100
Adoption by Reference 437‑002‑0101
Oregon Start-Up Dates 437‑002‑0107
Spray Finishing 437‑002‑0109
Explosives and Blasting Agents 437‑002‑0118
Oregon Rules for Reinforced Plastics Manufacturing 437‑002‑0119
Oregon Effective Dates 437‑002‑0120
Adoption by Reference 437‑002‑0122
Dipping and Coating 437‑002‑0134
Personal Protective Equipment 437‑002‑0139
Working Underway on Water. 437‑002‑0140
Adoption by Reference 437‑002‑0141
Additional Oregon Sanitation Requirements 437‑002‑0142
Labor Camps 437‑002‑0144
Additional Oregon Rules for General Environmental Controls 437‑002‑0145
Additional Oregon Rules for Accident Prevention and Tags 437‑002‑0146
Confined Spaces 437‑002‑0154
Individual Locks 437‑002‑0161
Medical Services and First Aid 437‑002‑0170
Worker Protection Standard 437‑002‑0180
Adoption by Reference 437‑002‑0182
Oregon Rules for Fire Fighters 437‑002‑0187
Portable Fire Extinguishers 437‑002‑0200
Adoption by Reference 437‑002‑0210
Additional Oregon Rules for Compressed Air and Compressed Gas Equipment 437‑002‑0220
Adoption by Reference 437‑002‑0221
Additional Oregon Rules for Handling Materials 437‑002‑0223
Oregon Rules for Commercial and Industrial Vehicles 437‑002‑0227
Additional Oregon Rules for Powered Industrial Trucks 437‑002‑0228
Oregon General Requirements for Cranes 437‑002‑0229
Additional Oregon Rules for Overhead and Gantry Cranes 437‑002‑0230
Additional Oregon Rule for Crawler, Locomotive and Truck Cranes 437‑002‑0232
Additional Oregon Rule for Derricks 437‑002‑0233
Oregon Rules for Hammerhead Cranes 437‑002‑0235
Additional Oregon Rule for Slings 437‑002‑0240
Adoption by Reference 437‑002‑0242
Oregon Rules for Machinery and Machine Guarding 437‑002‑0256
Stationary Compactors, Self-Contained Compactors, and Balers 437‑002‑0260
Adoption by Reference 437‑002‑0262
Additional Definitions in Oregon 437‑002‑0264
Additional General Requirements for Hand Tools 437‑002‑0266
Additional Oregon Rules for Guarding Portable Powered Tools 437‑002‑0268
Oregon Rules for Hand-Powered Equipment 437‑002‑0280
Adoption by Reference 437‑002‑0282
Job Planning and Layout 437‑002‑0283
Eye Protection and Protective Clothing 437‑002‑0284
Specifications for Protectors 437‑002‑0285
Special Precautions 437‑002‑0286
Preservative Coatings 437‑002‑0287
Toxic Preservative Coatings 437‑002‑0288
Health Protection and Ventilation — General 437‑002‑0297
Welding or Cutting Containers 437‑002‑0298
Self-Contained Units 437‑002‑0300
Adoption by Reference 437‑002‑0301
Scope and Application 437‑002‑0302
Definitions 437‑002‑0303
Training and Work Planning 437‑002‑0304
First Aid Requirements 437‑002‑0305
Traffic Control 437‑002‑0306
Electrical Hazards 437‑002‑0307
Personal Protective Equipment 437‑002‑0308
Portable Power Tools 437‑002‑0309
Hand Tools 437‑002‑0310
Work Procedures 437‑002‑0311
Mobile Equipment 437‑002‑0312
Oregon Rules for Pulp, Paper and Paperboard Mills 437‑002‑0313
Additional Oregon Rules for Sawmills 437‑002‑0314
Veneer and Plywood Machinery 437‑002‑0315
Shake and Shingle Machinery 437‑002‑0316
Oregon Rules for Telecommunications 437‑002‑0320
Adoption by Reference. 437‑002‑0340
Adoption by Reference 437‑002‑0342
Additional Oregon Definition 437‑002‑0345
Inland Emergency Aid 437‑002‑0355
Air Supply Systems (Compressed Gases and Air) 437‑002‑0360
Adoption by Reference 437‑002‑0363
Oregon Amendment 437‑002‑0364
Oregon Rules for MOCA (4,4’-Methylene Bis (2-chloroaniline)) 437‑002‑0368
Deterioration 437‑002‑0371
Scope and Application 437‑002‑0373
Oregon Rules for Thiram 437‑002‑0377
Additional Oregon Rules for Hazard Communication 437‑002‑0378
Oregon Rules for Pipe Labelling 437‑002‑0382
Oregon Rules for Air Contaminants 437‑002‑0390
Oregon Effective Dates 437‑002‑0391
Additional Oregon Rules for Carcinogens in Laboratories 437‑002‑1001
Asbestos Respiratory Protection Program 437‑002‑1017
Vinyl Chloride Respiratory Protection Program 437‑002‑1018
Inorganic Arsenic Respiratory Protection Program 437‑002‑1025
Lead Respiratory Protection Program 437‑002‑1027
Cadmium Respiratory Protection Program 437‑002‑1028
Benzene Respiratory Protection Program 437‑002‑1029
Coke Oven Emissions Respiratory Protection Program 437‑002‑1030
Additional Oregon Rules for Bloodborne Pathogens 437‑002‑1035
Oregon Rule for Sharps Injury Log 437‑002‑1043
Cotton Dust Respiratory Protection Program 437‑002‑1044
1,2-Dibromo-3-Chloropropane Respiratory Protection Program 437‑002‑1045
Acrylonitrile Respiratory Protection Program 437‑002‑1047
Ethylene Oxide Respiratory Protection Program 437‑002‑1048
Formaldehyde Respiratory Protection Program 437‑002‑1050
Methylenedianiline Respiratory Protection Program 437‑002‑1051
1,3-Butadiene Respiratory Protection Program 437‑002‑1052
Methylene Chloride Respiratory Protection Program 437‑002‑1053
Scope and Application 437‑002‑1054
Definitions 437‑002‑1055
Permissible Exposure Limit (PEL) 437‑002‑1056
Exposure Assessment 437‑002‑1057
Specified exposure control methods 437‑002‑1058
Regulated and Restricted Access Areas 437‑002‑1059
Methods of Compliance 437‑002‑1060
Respiratory Protection 437‑002‑1061
Housekeeping 437‑002‑1062
Medical Surveillance 437‑002‑1063
Communication of Respirable Crystalline Silica Hazards to Employees 437‑002‑1064
Recordkeeping 437‑002‑1065
Dates 437‑002‑1139
Working Over or In Water 437‑002‑2021
Additional Oregon Definitions 437‑002‑2022
Additional Oregon Rules for Powered Platforms 437‑002‑2024
Scope and Application 437‑002‑2025
Definitions 437‑002‑2026
Permissible Exposure Limit (PEL) 437‑002‑2027
Rope Descent & Rope Access Systems 437‑002‑2028
Regulated and Restricted Access Areas 437‑002‑2029
Methods of Compliance 437‑002‑2030
Respiratory Protection 437‑002‑2031
Delayed Effective Dates for Walking-Working Surfaces 437‑002‑2032
Hygiene Areas and Practices 437‑002‑2033
Housekeeping 437‑002‑2034
Medical Surveillance 437‑002‑2035
Medical Removal 437‑002‑2036
Communication of Beryllium Hazards to Employees 437‑002‑2037
Recordkeeping 437‑002‑2038
Dates 437‑002‑2040
Exposure Assessment 437‑002‑2045
Personal Protective Clothing and Equipment 437‑002‑2101
Compressed Gases (General Requirements) 437‑002‑2102
Acetylene 437‑002‑2224
Vehicle Drivers and Riders 437‑002‑2225
Vehicles for Highway and Road Operation Characteristics and Maintenance 437‑002‑2226
Vehicles for Use on Property Other Than Public Roads and Highways Operation, Characteristics and Maintenance 437‑002‑2253
Oxygen-fuel Gas Welding and Cutting 437‑002‑2300
General 437‑002‑2301
Medical Services and First Aid 437‑002‑2302
Job Briefing 437‑002‑2303
Hazardous Energy Control Procedures 437‑002‑2304
Enclosed Spaces 437‑002‑2305
Excavations 437‑002‑2306
Personal Protective Equipment 437‑002‑2307
Portable Ladders and Platforms 437‑002‑2308
Hand and Portable Power Equipment 437‑002‑2309
Live-line Tools 437‑002‑2310
Materials Handling and Storage 437‑002‑2311
Working On or Near Exposed Energized Parts 437‑002‑2312
Deenergizing Lines and Equipment for Employee Protection 437‑002‑2313
Grounding for the Protection of Employees 437‑002‑2314
Testing and Test Facilities 437‑002‑2315
Mechanical Equipment 437‑002‑2316
Overhead Lines 437‑002‑2317
Line-clearance Tree Trimming 437‑002‑2318
Communication Facilities 437‑002‑2319
Underground Electrical Installations 437‑002‑2320
Substations 437‑002‑2321
Power Generation Installations 437‑002‑2322
Special Conditions 437‑002‑2323
Helicopters 437‑002‑2324
Definitions
Last Updated

Jun. 8, 2021

Rule 437-002-0022’s source at or​.us