OAR 437-002-0256
Stationary Compactors, Self-Contained Compactors, and Balers

This applies to all stationary compactors, self-contained compactors, and balers.
You must comply with:
Subdivision 2/D Walking/Working Surfaces, for ladders, stairs and other walking/working surfaces.
Subdivision 2/J 1910.147, Control of Hazardous Energy, for maintenance, servicing, and repair activities.
Subdivision 2/J 437-002-0146 (Confined Spaces) Confined Spaces for confined space hazards.
Subdivision 2/O Machine Guarding for any guarding hazard not covered in these rules.
YOUR RESPONSIBILITY:
To protect employees from hazards associated with stationary compactors, self-contained compactors, and balers.
Operators and other employees

(1)

You must:
Train and supervise equipment operators. Training must include information from the operation manual, when available, and these rules.
Document the name(s) of the trainer and trainees along with the date of the training.
Provide supervision to ensure employees follow correct operating procedures.
Instruct all employees how to identify and report exposure to hazards.
Prohibit wearing loose clothing, jewelry, or long loose hair that can become entangled in the equipment.
Installation, inspection and maintenance

(2)

You must:
Install the equipment according to the manufacturer’s instructions.
Keep the equipment in safe working order.
Maintain the equipment according to manufacturer’s recommendations when available.
Follow the manufacturer’s recommendations for inspecting and testing. If there are no manufacturer’s recommendations available, inspect and test annually.
Keep a record of inspections for a minimum of two years.
Make sure that modifications do not diminish the original level of safety.
Add safety precautions, resulting from modifications, to the operation manual, when available, and to the training information.
Not allow the use of damaged, malfunctioning, or defective equipment.
Ensure only qualified employees, trained and authorized by your management, or authorized service technicians are allowed to maintain and repair the equipment. Qualified employees must demonstrate a proficiency in maintaining and repairing the equipment.
Guard moving parts

(3)

You must:
Have guards that prevent body parts from getting caught by moving parts during the equipment’s cycle.
Use sustained manual pressure controls when not using point of operation guarding.
Make certain the point of operation is visible to the operator when using sustained manual pressure controls.
Make sure the equipment manufactured with interlocks will not function with the gate or door open.
Controls

(4)

You must:
Clearly label the function of each control.
Make sure controls are not subject to unintentional activation.
Have stop controls that are red, a different size than other controls, and not recessed.
Keep emergency stop controls readily accessible to the operator, or within 3 feet of the operating feed area or chute opening at equipment location.
Provide a way to stop the complete operation of the baler or compactor at any point in the cycle.
Require horizontal balers equipped with an automatic start, to have a minimum 5-second audible and visual warning when the startup control is activated. Before the main motor starts, there must be visual warning lasting for not less than 10 additional seconds.
No alarm or delay is required when the horizontal baler is restarting from sleep mode.
Access points for Maintenance or Repairs

(5)

You must:
Make sure access covers
Have functional interlocks or locks that require hand tools for removal.
Have warning signs on compactors that read:
Restricted Area, Authorized Employees Only,
Warning – Stand Clear When Tailgate or Container is in Motion and During Loading and Unloading,
Warning – This Compactor Starts Automatically,
Warning – Gate Must Be Closed Before Operating This Compactor.
Have warning signs on balers that read:
CAUTION – Stand clear When Bale is Ejected,
WARNING – This Baler Starts Automatically,
DANGER – High Voltage,
DANGER – Disconnect and Lock Out Power Before Opening This Panel
Replace missing or defaced signs.
Note: Additional sign requirements are in ANSI Z245-2-1997 7.10 compactors and ANSI Z245.5 –1997 5.1.6. balers.
Immediate work area

(6)

You must:
Not allow clutter or waste material that causes a safety hazard or obstructs safe operation to accumulate around the operator station.
Include warning signs at all loading points and the point of operation on automatic cycling equipment indicating that the baler or compactor starts automatically.

Source: Rule 437-002-0256 — Stationary Compactors, Self-Contained Compactors, and Balers, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=437-002-0256.

437‑002‑0005
Adoption by Reference 437‑002‑0006
General Oregon Definitions 437‑002‑0007
Testing and Certification 437‑002‑0010
Adoption by Reference 437‑002‑0015
Adoption by Reference 437‑002‑0020
Adoption by Reference 437‑002‑0022
Additional Oregon General Requirements 437‑002‑0026
Portable Ladders 437‑002‑0032
Ramps and Runways 437‑002‑0033
Piers and Wharves 437‑002‑0040
Adoption by Reference 437‑002‑0041
Exits and Exit Routes 437‑002‑0042
Emergency Action Plan 437‑002‑0043
Fire Prevention Plan 437‑002‑0047
Working Near Overhead High Voltage Lines and Equipment 437‑002‑0060
Adoption by Reference 437‑002‑0080
Adoption by Reference 437‑002‑0081
Oregon Ventilation Regulations 437‑002‑0095
Audiometric Testing in Oregon 437‑002‑0098
Additional Applicability 437‑002‑0100
Adoption by Reference 437‑002‑0101
Oregon Start-Up Dates 437‑002‑0107
Spray Finishing 437‑002‑0109
Explosives and Blasting Agents 437‑002‑0118
Oregon Rules for Reinforced Plastics Manufacturing 437‑002‑0119
Oregon Effective Dates 437‑002‑0120
Adoption by Reference 437‑002‑0122
Dipping and Coating 437‑002‑0134
Personal Protective Equipment 437‑002‑0139
Working Underway on Water. 437‑002‑0140
Adoption by Reference 437‑002‑0141
Additional Oregon Sanitation Requirements 437‑002‑0142
Labor Camps 437‑002‑0144
Additional Oregon Rules for General Environmental Controls 437‑002‑0145
Additional Oregon Rules for Accident Prevention and Tags 437‑002‑0146
Confined Spaces 437‑002‑0154
Individual Locks 437‑002‑0161
Medical Services and First Aid 437‑002‑0170
Worker Protection Standard 437‑002‑0180
Adoption by Reference 437‑002‑0182
Oregon Rules for Fire Fighters 437‑002‑0187
Portable Fire Extinguishers 437‑002‑0200
Adoption by Reference 437‑002‑0210
Additional Oregon Rules for Compressed Air and Compressed Gas Equipment 437‑002‑0220
Adoption by Reference 437‑002‑0221
Additional Oregon Rules for Handling Materials 437‑002‑0223
Oregon Rules for Commercial and Industrial Vehicles 437‑002‑0227
Additional Oregon Rules for Powered Industrial Trucks 437‑002‑0228
Oregon General Requirements for Cranes 437‑002‑0229
Additional Oregon Rules for Overhead and Gantry Cranes 437‑002‑0230
Additional Oregon Rule for Crawler, Locomotive and Truck Cranes 437‑002‑0232
Additional Oregon Rule for Derricks 437‑002‑0233
Oregon Rules for Hammerhead Cranes 437‑002‑0235
Additional Oregon Rule for Slings 437‑002‑0240
Adoption by Reference 437‑002‑0242
Oregon Rules for Machinery and Machine Guarding 437‑002‑0256
Stationary Compactors, Self-Contained Compactors, and Balers 437‑002‑0260
Adoption by Reference 437‑002‑0262
Additional Definitions in Oregon 437‑002‑0264
Additional General Requirements for Hand Tools 437‑002‑0266
Additional Oregon Rules for Guarding Portable Powered Tools 437‑002‑0268
Oregon Rules for Hand-Powered Equipment 437‑002‑0280
Adoption by Reference 437‑002‑0282
Job Planning and Layout 437‑002‑0283
Eye Protection and Protective Clothing 437‑002‑0284
Specifications for Protectors 437‑002‑0285
Special Precautions 437‑002‑0286
Preservative Coatings 437‑002‑0287
Toxic Preservative Coatings 437‑002‑0288
Health Protection and Ventilation — General 437‑002‑0297
Welding or Cutting Containers 437‑002‑0298
Self-Contained Units 437‑002‑0300
Adoption by Reference 437‑002‑0301
Scope and Application 437‑002‑0302
Definitions 437‑002‑0303
Training and Work Planning 437‑002‑0304
First Aid Requirements 437‑002‑0305
Traffic Control 437‑002‑0306
Electrical Hazards 437‑002‑0307
Personal Protective Equipment 437‑002‑0308
Portable Power Tools 437‑002‑0309
Hand Tools 437‑002‑0310
Work Procedures 437‑002‑0311
Mobile Equipment 437‑002‑0312
Oregon Rules for Pulp, Paper and Paperboard Mills 437‑002‑0313
Additional Oregon Rules for Sawmills 437‑002‑0314
Veneer and Plywood Machinery 437‑002‑0315
Shake and Shingle Machinery 437‑002‑0316
Oregon Rules for Telecommunications 437‑002‑0320
Adoption by Reference. 437‑002‑0340
Adoption by Reference 437‑002‑0342
Additional Oregon Definition 437‑002‑0345
Inland Emergency Aid 437‑002‑0355
Air Supply Systems (Compressed Gases and Air) 437‑002‑0360
Adoption by Reference 437‑002‑0363
Oregon Amendment 437‑002‑0364
Oregon Rules for MOCA (4,4’-Methylene Bis (2-chloroaniline)) 437‑002‑0368
Deterioration 437‑002‑0371
Scope and Application 437‑002‑0373
Oregon Rules for Thiram 437‑002‑0377
Additional Oregon Rules for Hazard Communication 437‑002‑0378
Oregon Rules for Pipe Labelling 437‑002‑0382
Oregon Rules for Air Contaminants 437‑002‑0390
Oregon Effective Dates 437‑002‑0391
Additional Oregon Rules for Carcinogens in Laboratories 437‑002‑1001
Asbestos Respiratory Protection Program 437‑002‑1017
Vinyl Chloride Respiratory Protection Program 437‑002‑1018
Inorganic Arsenic Respiratory Protection Program 437‑002‑1025
Lead Respiratory Protection Program 437‑002‑1027
Cadmium Respiratory Protection Program 437‑002‑1028
Benzene Respiratory Protection Program 437‑002‑1029
Coke Oven Emissions Respiratory Protection Program 437‑002‑1030
Additional Oregon Rules for Bloodborne Pathogens 437‑002‑1035
Oregon Rule for Sharps Injury Log 437‑002‑1043
Cotton Dust Respiratory Protection Program 437‑002‑1044
1,2-Dibromo-3-Chloropropane Respiratory Protection Program 437‑002‑1045
Acrylonitrile Respiratory Protection Program 437‑002‑1047
Ethylene Oxide Respiratory Protection Program 437‑002‑1048
Formaldehyde Respiratory Protection Program 437‑002‑1050
Methylenedianiline Respiratory Protection Program 437‑002‑1051
1,3-Butadiene Respiratory Protection Program 437‑002‑1052
Methylene Chloride Respiratory Protection Program 437‑002‑1053
Scope and Application 437‑002‑1054
Definitions 437‑002‑1055
Permissible Exposure Limit (PEL) 437‑002‑1056
Exposure Assessment 437‑002‑1057
Specified exposure control methods 437‑002‑1058
Regulated and Restricted Access Areas 437‑002‑1059
Methods of Compliance 437‑002‑1060
Respiratory Protection 437‑002‑1061
Housekeeping 437‑002‑1062
Medical Surveillance 437‑002‑1063
Communication of Respirable Crystalline Silica Hazards to Employees 437‑002‑1064
Recordkeeping 437‑002‑1065
Dates 437‑002‑1139
Working Over or In Water 437‑002‑2021
Additional Oregon Definitions 437‑002‑2022
Additional Oregon Rules for Powered Platforms 437‑002‑2024
Scope and Application 437‑002‑2025
Definitions 437‑002‑2026
Permissible Exposure Limit (PEL) 437‑002‑2027
Rope Descent & Rope Access Systems 437‑002‑2028
Regulated and Restricted Access Areas 437‑002‑2029
Methods of Compliance 437‑002‑2030
Respiratory Protection 437‑002‑2031
Delayed Effective Dates for Walking-Working Surfaces 437‑002‑2032
Hygiene Areas and Practices 437‑002‑2033
Housekeeping 437‑002‑2034
Medical Surveillance 437‑002‑2035
Medical Removal 437‑002‑2036
Communication of Beryllium Hazards to Employees 437‑002‑2037
Recordkeeping 437‑002‑2038
Dates 437‑002‑2040
Exposure Assessment 437‑002‑2045
Personal Protective Clothing and Equipment 437‑002‑2101
Compressed Gases (General Requirements) 437‑002‑2102
Acetylene 437‑002‑2224
Vehicle Drivers and Riders 437‑002‑2225
Vehicles for Highway and Road Operation Characteristics and Maintenance 437‑002‑2226
Vehicles for Use on Property Other Than Public Roads and Highways Operation, Characteristics and Maintenance 437‑002‑2253
Oxygen-fuel Gas Welding and Cutting 437‑002‑2300
General 437‑002‑2301
Medical Services and First Aid 437‑002‑2302
Job Briefing 437‑002‑2303
Hazardous Energy Control Procedures 437‑002‑2304
Enclosed Spaces 437‑002‑2305
Excavations 437‑002‑2306
Personal Protective Equipment 437‑002‑2307
Portable Ladders and Platforms 437‑002‑2308
Hand and Portable Power Equipment 437‑002‑2309
Live-line Tools 437‑002‑2310
Materials Handling and Storage 437‑002‑2311
Working On or Near Exposed Energized Parts 437‑002‑2312
Deenergizing Lines and Equipment for Employee Protection 437‑002‑2313
Grounding for the Protection of Employees 437‑002‑2314
Testing and Test Facilities 437‑002‑2315
Mechanical Equipment 437‑002‑2316
Overhead Lines 437‑002‑2317
Line-clearance Tree Trimming 437‑002‑2318
Communication Facilities 437‑002‑2319
Underground Electrical Installations 437‑002‑2320
Substations 437‑002‑2321
Power Generation Installations 437‑002‑2322
Special Conditions 437‑002‑2323
Helicopters 437‑002‑2324
Definitions
Last Updated

Jun. 8, 2021

Rule 437-002-0256’s source at or​.us