OAR 736-004-0065
Placement of ATV Off-Road Operating Permit


(1)

An ATV operating permit shall be in the form of a decal to be permanently affixed to the vehicle for which it is issued, and must be clearly visible.

(2)

Placement of the permit shall be as follows:

(a)

For quads, three-wheelers, or vehicles of a similar design, the permit shall be displayed on the right-hand side of the vehicle in a visible location;

(b)

For jeeps, pickups, passenger cars and similar vehicles, the permit shall be displayed in a manner that makes it visible from the rear of the vehicle, such as on the bumper or in the rear window;

(c)

On sandrail vehicles (dune buggies) the permit shall be displayed in the middle of the rear rollbar and be visible from the rear of the vehicle; and

(d)

For vehicles that are similar in design to motorcycles and where it is not possible to display the permit as required in sections (2) or (3) of this rule, the permit shall be displayed:

(A)

On the front fork tube, on the opposite side of the vehicle from the brake, or in a location that is visible while the rider is on the vehicle; and

(B)

Be positioned either horizontally or vertically.

Source: Rule 736-004-0065 — Placement of ATV Off-Road Operating Permit, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=736-004-0065.

Last Updated

Jun. 8, 2021

Rule 736-004-0065’s source at or​.us