OAR 340-150-0110
UST General Permit Registration, Annual Compliance and Other Fees

(1)

An owner and permittee must pay a $400 installation fee for each UST or UST compartment installed and the general permit registration fee for each tank. This fee must accompany the application for a UST general permit registration certificate. The registration fee is the amount of the annual compliance fee in section (2) of this rule applicable to the year of installation.

(2)

Each calendar year (January 1 to December 31) following installation, the owner and permittee must pay an annual compliance fee for each UST that has not been permanently decommissioned, for any portion of the year, according to the following schedule:

(a)

$25 per tank for the years 1988, 1989, 1990, 1991, 1992 and 1993;

(b)

$35 per tank for the years 1994, 1995, 1996 and 1997;

(c)

$60 per tank for the years 1998, 1999, 2000 and 2001, except that for 1998 and 1999 the fee is $35 for any permittee that self-certifies its compliance with 1998 technical standards to DEQ;

(d)

$105 per tank for 2002, which includes a $20 surcharge per tank;

(e)

$85 per tank for the years 2003, 2004, 2005, 2006 and 2007; and

(f)

$135 per tank for 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017.

(g)

$195 per tank for 2018;

(h)

$245 per tank for 2019;

(i)

$295 per tank for 2020;

(j)

$325 per tank for 2021 and subsequent years.

(3)

For multichambered or multicompartmented USTs, the owner and permittee must pay the general permit registration fee and annual compliance fee for each chamber or compartment.

(4)

DEQ will issue an invoice to each permittee for the annual compliance fees due for each UST facility for each calendar year. The permittee must pay fees by the due date listed on the invoice. DEQ will assess a $35 late fee for each invoice that is not paid by the due date. At its discretion, DEQ may allow the permittee to make alternative arrangements for payment.

(5)

For any UST that was not permitted by May 1, 1988, or that was not permitted before installation during any year thereafter, the owner and permittee must pay the annual compliance fee for each calendar year or part of a calendar year since installation, except that the total amount of fees owed will not be more than $500 per tank. These fees must be paid before DEQ will approve a 30-day or 3-day notice to decommission the UST.

(6)

All checks or money orders for fees must be made payable to DEQ.

Source: Rule 340-150-0110 — UST General Permit Registration, Annual Compliance and Other Fees, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=340-150-0110.

340–150–0001
Purpose and Scope 340–150–0006
Applicability and General Requirements 340–150–0008
Exemptions and Deferrals 340–150–0010
Definitions 340–150–0020
UST General Permit Registration Certificate Required 340–150–0021
Termination of Temporary Permits 340–150–0052
Modification of Registration Certificates For Changes in Ownership and Permittee 340–150–0080
Denial, Suspension or Revocation of General Permit Registration Certificates 340–150–0102
Termination of General Permit Registration Certificates for Installation, Operation and Temporary Closure 340–150–0110
UST General Permit Registration, Annual Compliance and Other Fees 340–150–0135
General Requirements for Owners and Permittees 340–150–0137
UST Systems with Field-Constructed Tanks and Airport Hydrant Fuel Distribution Systems 340–150–0140
Requirements for Sellers of USTs 340–150–0150
Depositing Regulated Substances in USTs 340–150–0152
Requirements for Distributors of Regulated Substances for Deposit into USTs 340–150–0156
Performance of UST Services by Owners or Permittees 340–150–0160
General Permit Requirements for Installing an UST System 340–150–0163
General Permit Requirements for Operating an UST System 340–150–0167
General Permit Requirements for Temporary Closure of an UST System 340–150–0168
General Permit Requirements for Decommissioning an UST System by Permanent Closure or Change-in-Service 340–150–0180
Site Assessment Requirements 340–150–0200
Training Requirements for UST System Operators and Emergency Response Information 340–150–0210
Training Requirements for UST Operators 340–150–0250
Expedited Enforcement Process 340–150–0302
Installation of Used USTs 340–150–0310
Spill and Overfill Prevention Equipment and Testing Requirements 340–150–0315
Periodic operation and maintenance walkthrough inspections 340–150–0320
Corrosion Protection Performance Standards for USTs and Piping 340–150–0325
Operation and Maintenance of Corrosion Protection 340–150–0350
UST System Repairs 340–150–0352
UST System Modifications and Additions 340–150–0354
UST System Replacements 340–150–0360
Requirements for Internally Lined USTs 340–150–0400
General Release Detection Requirements for Petroleum UST Systems 340–150–0410
Release Detection Requirements and Methods for Underground Piping 340–150–0420
Release Detection Requirements for Hazardous Substance UST Systems 340–150–0430
Inventory Control Method of Release Detection 340–150–0435
Statistical Inventory Reconciliation Method of Release Detection 340–150–0440
Manual Tank Gauging Release Detection Method 340–150–0445
Tank Tightness Testing for Release Detection and Investigation 340–150–0450
Automatic Tank Gauging Release Detection Method 340–150–0465
Interstitial Monitoring Release Detection Method 340–150–0470
Other Methods of Release Detection 340–150–0500
Reporting Suspected Releases 340–150–0510
Suspected Release Investigation and Confirmation Steps 340–150–0520
Investigation Due to Off Site Impacts 340–150–0540
Applicability to Previously Closed UST Systems 340–150–0550
Definitions for OAR 340-150-0555 and 340-150-0560 340–150–0555
Compliance Dates for USTs and Piping 340–150–0560
Upgrading Requirements for Existing UST Systems 340–150–0600
Delegation of Program Administration 340–150–0620
Approval of More Stringent Performance Standards
Last Updated

Jun. 8, 2021

Rule 340-150-0110’s source at or​.us