OAR 603-027-0680
Placed in Service
(1)
It is licensed as required in ORS 618.121 (License required for commercially operated weighing or measuring instrument);(2)
Either:(a)
A Placed in Service Report is completed and distributed as required in OAR 603-027-0690 (Placed in Service Report); or(b)
Express permission is given to the device owner or operator by a representative of the Measurement Standards Division,(3)
The devices are in compliance with all applicable requirements of the 2010 Edition of the National Institute of Standards and Technology (N.I.S.T.) Handbook 44;(4)
The devices are issued an active National Type Evaluation Program (N.T.E.P.) Certificate of Conformance (CC) on the entire weighing or measuring system unless otherwise exempted;(5)
The devices are installed in accordance with the manufacture’s instructions;(6)
The devices are adjusted within applicable tolerances and not Predominantly in Favor of the device owner or operator;(7)
The devices are adjusted as closely as practicable to zero error; and(8)
Security seals are appropriately affixed to any mechanism designed to be sealed.
Source:
Rule 603-027-0680 — Placed in Service, https://secure.sos.state.or.us/oard/view.action?ruleNumber=603-027-0680.