OAR 660-023-0180
Mineral and Aggregate Resources


(1)

For purposes of this rule, the following definitions apply:

(a)

“Aggregate resources” are naturally occurring concentrations of stone, rock, sand gravel, decomposed granite, limestone, pumice, cinders, and other naturally occurring solid materials commonly used in road building or other construction.

(b)

“Conflicting use” is a use or activity that is subject to land use regulations and that would interfere with, or be adversely affected by, mining or processing activities at a significant mineral or aggregate resource site (as specified in subsection (5)(b) and section (7) of this rule).

(c)

“Existing site” is an aggregate site that meets the requirements of subsection (3)(a) of this rule and was lawfully operating, or was included on an inventory of significant aggregate sites in an acknowledged plan, on September 1, 1996.

(d)

“Expansion area” is an aggregate mining area contiguous to an existing site.

(e)

“Farmland” means land planned and zoned for exclusive farm use pursuant to Goal 3 and OAR chapter 660, division 033.

(f)

“Mineral resources” are those materials and substances described in ORS 517.750 (Definitions for ORS 517.702 to 517.989)(7) but excluding materials and substances described as “aggregate resources” under subsection (a) of this section.

(g)

“Minimize a conflict” means to reduce an identified conflict to a level that is no longer significant. For those types of conflicts addressed by local, state, or federal standards (such as the Department of Environmental Quality standards for noise and dust levels), to “minimize a conflict” means to ensure conformance to the applicable standard.

(h)

“Mining” is the extraction and processing of mineral or aggregate resources, as defined in ORS 215.298 (Mining in exclusive farm use zone)(1)(b) for farmland, and in ORS 517.750 (Definitions for ORS 517.702 to 517.989) for land other than farmland.

(i)

“Mining area” is the area of a site within which mining is permitted or proposed, excluding undisturbed buffer areas or areas on a parcel where mining is not authorized.

(j)

“Processing” means the activities described in ORS 517.750 (Definitions for ORS 517.702 to 517.989)(10).

(k)

“Protect” means to adopt land use regulations for a significant mineral or aggregate site in order to authorize mining of the site. For purposes of subsection (2)(d) of this rule, “protect” also means to limit or prohibit new conflicting uses within the impact area of the site.

(l)

“Thickness of the aggregate layer” means the depth of the water-lain deposit of sand, stones, and pebbles of sand-sized fraction or larger, minus the depth of the topsoil and nonaggregate overburden.

(m)

“Willamette Valley” means Clackamas, Columbia, Linn, Marion, Multnomah, Polk, Washington, and Yamhill counties and the portions of Lane and Benton Counties east of the summit of the Coast Range.

(2)

Local governments are not required to amend acknowledged inventories or plans with regard to mineral and aggregate resources except in response to an application for a post acknowledgement plan amendment (PAPA) or at periodic review as specified in section (9) of this rule. The requirements of this rule modify, supplement, or supersede the requirements of the standard Goal 5 process in OAR 660-023-0030 (Inventory Process) through 660-023-0050 (Programs to Achieve Goal 5), as follows:

(a)

A local government may inventory mineral and aggregate resources throughout its jurisdiction, or in a portion of its jurisdiction. When a local government conducts an inventory of mineral and aggregate sites in all or a portion of its jurisdiction, it shall follow the requirements of OAR 660-023-0030 (Inventory Process) except as modified by subsection (b) of this section with respect to aggregate sites. When a local government is following the inventory process for a mineral or aggregate resource site under a PAPA, it shall follow the applicable requirements of OAR 660-023-0030 (Inventory Process), except where those requirements are expanded or superceded for aggregate resources as provided in subsections (b) through (d) of this section and sections (3), (4) and (8) of this rule;

(b)

Local governments shall apply the criteria in section (3) or (4) of this rule, whichever is applicable, rather than OAR 660-023-0030 (Inventory Process)(4), in determining whether an aggregate resource site is significant;

(c)

Local governments shall follow the requirements of section (5) or (6) of this rule, whichever is applicable, in deciding whether to authorize the mining of a significant aggregate resource site, and OAR 660-023-0040 (ESEE Decision Process) through 660-023-0050 (Programs to Achieve Goal 5) in deciding whether to authorize mining of a significant mineral resource; and

(d)

For significant mineral and aggregate sites where mining is allowed, except for aggregate sites that have been determined to be significant under section (4) of this rule, local governments shall decide on a program to protect the site from new off-site conflicting uses by following the standard ESEE process in OAR 660-023-0040 (ESEE Decision Process) and 660-023-0050 (Programs to Achieve Goal 5) with regard to such uses.

(3)

An aggregate resource site shall be considered significant if adequate information regarding the quantity, quality, and location of the resource demonstrates that the site meets any one of the criteria in subsections (a) through (c) of this section, except as provided in subsection (d) of this section:

(a)

A representative set of samples of aggregate material in the deposit on the site meets applicable Oregon Department of Transportation (ODOT) specifications for base rock for air degradation, abrasion, and soundness, and the estimated amount of material is more than 2,000,000 tons in the Willamette Valley, or more than 500,000 tons outside the Willamette Valley;

(b)

The material meets local government standards establishing a lower threshold for significance than subsection (a) of this section; or

(c)

The aggregate site was on an inventory of significant aggregate sites in an acknowledged plan on September 1, 1996.

(d)

Notwithstanding subsections (a) and (b) of this section, except for an expansion area of an existing site if the operator of the existing site on March 1, 1996, had an enforceable property interest in the expansion area on that date, an aggregate site is not significant if the criteria in either paragraphs (A) or (B) of this subsection apply:

(A)

More than 35 percent of the proposed mining area consists of soil classified as Class I on Natural Resource and Conservation Service (NRCS) maps on June 11, 2004; or

(B)

More than 35 percent of the proposed mining area consists of soil classified as Class II, or of a combination of Class II and Class I or Unique soil, on NRCS maps available on June 11, 2004, unless the average thickness of the aggregate layer within the mining area exceeds:
(i)
60 feet in Washington, Multnomah, Marion, Columbia, and Lane counties;
(ii)
25 feet in Polk, Yamhill, and Clackamas counties; or
(iii)
17 feet in Linn and Benton counties.

(4)

Notwithstanding section (3) of this rule, a local government may also determine that an aggregate resource site on farmland is significant if subsections (a) and (b) of this section apply or if subsection (c) of this section applies:

(a)

The quantity of material proposed to be mined from the site is estimated to be 2,000,000 tons of aggregate material or less for a site in the Willamette Valley, or 500,000 tons or less for a site outside the Willamette Valley; and

(b)

Not more than 35 percent of the proposed mining area consists of soil:

(A)

Classified as Class I on Natural Resource and Conservation Service (NRCS) maps available on June 11, 2004; or

(B)

Classified as Class II, or of a combination of Class II and Class I or Unique soil, on NRCS maps on June 11, 2004, unless the average thickness of the aggregate layer within the mining area exceeds the amounts specified in paragraph (B) of subsection (3)(d) of this rule.

(c)

A local land use permit that allows mining on the site was issued prior to April 3, 2003, and the permit is in effect at the time of the significance determination.

(5)

For significant mineral and aggregate sites, local governments shall decide whether mining is permitted. For a PAPA application involving an aggregate site determined to be significant under section (3) of this rule, the process for this decision is set out in subsections (a) through (g) of this section. A local government must complete the process within 180 days after receipt of a complete application that is consistent with section (8) of this rule, or by the earliest date after 180 days allowed by local charter.

(a)

The local government shall determine an impact area for the purpose of identifying conflicts with proposed mining and processing activities. The impact area shall be large enough to include uses listed in subsection (b) of this section and shall be limited to 1,500 feet from the boundaries of the mining area, except where factual information indicates significant potential conflicts beyond this distance. For a proposed expansion of an existing aggregate site, the impact area shall be measured from the perimeter of the proposed expansion area rather than the boundaries of the existing aggregate site and shall not include the existing aggregate site.

(b)

The local government shall determine existing or approved land uses within the impact area that will be adversely affected by proposed mining operations and shall specify the predicted conflicts. For purposes of this section, “approved land uses” are dwellings allowed by a residential zone on existing platted lots and other uses for which conditional or final approvals have been granted by the local government. For determination of conflicts from proposed mining of a significant aggregate site, the local government shall limit its consideration to the following:

(A)

Conflicts due to noise, dust, or other discharges with regard to those existing and approved uses and associated activities (e.g., houses and schools) that are sensitive to such discharges;

(B)

Potential conflicts to local roads used for access and egress to the mining site within one mile of the entrance to the mining site unless a greater distance is necessary in order to include the intersection with the nearest arterial identified in the local transportation plan. Conflicts shall be determined based on clear and objective standards regarding sight distances, road capacity, cross section elements, horizontal and vertical alignment, and similar items in the transportation plan and implementing ordinances. Such standards for trucks associated with the mining operation shall be equivalent to standards for other trucks of equivalent size, weight, and capacity that haul other materials;

(C)

Safety conflicts with existing public airports due to bird attractants, i.e., open water impoundments as specified under OAR chapter 660, division 013;

(D)

Conflicts with other Goal 5 resource sites within the impact area that are shown on an acknowledged list of significant resources and for which the requirements of Goal 5 have been completed at the time the PAPA is initiated;

(E)

Conflicts with agricultural practices; and

(F)

Other conflicts for which consideration is necessary in order to carry out ordinances that supersede Oregon Department of Geology and Mineral Industries (DOGAMI) regulations pursuant to ORS 517.780 (Effect on county zoning laws or ordinances).

(c)

The local government shall determine reasonable and practicable measures that would minimize the conflicts identified under subsection (b) of this section. To determine whether proposed measures would minimize conflicts to agricultural practices, the requirements of ORS 215.296 (Standards for approval of certain uses in exclusive farm use zones) shall be followed rather than the requirements of this section. If reasonable and practicable measures are identified to minimize all identified conflicts, mining shall be allowed at the site and subsection (d) of this section is not applicable. If identified conflicts cannot be minimized, subsection (d) of this section applies.

(d)

The local government shall determine any significant conflicts identified under the requirements of subsection (c) of this section that cannot be minimized. Based on these conflicts only, local government shall determine the ESEE consequences of either allowing, limiting, or not allowing mining at the site. Local governments shall reach this decision by weighing these ESEE consequences, with consideration of the following:

(A)

The degree of adverse effect on existing land uses within the impact area;

(B)

Reasonable and practicable measures that could be taken to reduce the identified adverse effects; and

(C)

The probable duration of the mining operation and the proposed post-mining use of the site.

(e)

Where mining is allowed, the plan and implementing ordinances shall be amended to allow such mining. Any required measures to minimize conflicts, including special conditions and procedures regulating mining, shall be clear and objective. Additional land use review (e.g., site plan review), if required by the local government, shall not exceed the minimum review necessary to assure compliance with these requirements and shall not provide opportunities to deny mining for reasons unrelated to these requirements, or to attach additional approval requirements, except with regard to mining or processing activities:

(A)

For which the PAPA application does not provide information sufficient to determine clear and objective measures to resolve identified conflicts;

(B)

Not requested in the PAPA application; or

(C)

For which a significant change to the type, location, or duration of the activity shown on the PAPA application is proposed by the operator.

(f)

Where mining is allowed, the local government shall determine the post-mining use and provide for this use in the comprehensive plan and land use regulations. For significant aggregate sites on Class I, II and Unique farmland, local governments shall adopt plan and land use regulations to limit post-mining use to farm uses under ORS 215.203 (Zoning ordinances establishing exclusive farm use zones), uses listed under ORS 215.213 (Uses permitted in exclusive farm use zones in counties that adopted marginal lands system prior to 1993)(1) or 215.283 (Uses permitted in exclusive farm use zones in nonmarginal lands counties)(1), and fish and wildlife habitat uses, including wetland mitigation banking. Local governments shall coordinate with DOGAMI regarding the regulation and reclamation of mineral and aggregate sites, except where exempt under ORS 517.780 (Effect on county zoning laws or ordinances).

(g)

Local governments shall allow a currently approved aggregate processing operation at an existing site to process material from a new or expansion site without requiring a reauthorization of the existing processing operation unless limits on such processing were established at the time it was approved by the local government.

(6)

For an aggregate site on farmland that is determined to be significant under section (4) of this rule, the requirements of section (5) of this rule are not applicable, except for subsection (5)(f), and the requirements of OAR 660-023-0040 (ESEE Decision Process) though 660-023-0050 (Programs to Achieve Goal 5) are not applicable. Instead, local governments shall decide whether mining is permitted by applying subsections (a) through (d) of this section:

(a)

The proposed aggregate mine shall satisfy discretionary conditional use permit approval standards adopted by the local government pursuant to applicable requirements of ORS 215.213 (Uses permitted in exclusive farm use zones in counties that adopted marginal lands system prior to 1993)(2) or 215.283 (Uses permitted in exclusive farm use zones in nonmarginal lands counties)(2), and the requirements of ORS 215.296 (Standards for approval of certain uses in exclusive farm use zones) and 215.402 (Definitions for ORS 215.402 to 215.438 and 215.700 to 215.780) through 215.416 (Permit application);

(b)

The local government shall determine the post-mining use in accordance with subsection (5)(f) of this rule;

(c)

The local government shall issue a permit for mining aggregate only for a site included on an inventory of significant aggregate sites in the comprehensive plan in accordance with ORS 215.298 (Mining in exclusive farm use zone)(2); and

(d)

The conditional use permit shall not allow mining of more than the maximum amount of aggregate material specified under subsection (4)(a) of this rule.

(7)

Except for aggregate resource sites determined to be significant under section (4) of this rule, local governments shall follow the standard ESEE process in OAR 660-023-0040 (ESEE Decision Process) and 660-023-0050 (Programs to Achieve Goal 5) to determine whether to allow, limit, or prevent new conflicting uses within the impact area of a significant mineral and aggregate site. (This requirement does not apply if, under section (5) of this rule, the local government decides that mining will not be authorized at the site.)

(8)

In order to determine whether information in a PAPA submittal concerning an aggregate site is adequate, local government shall follow the requirements of this section rather than OAR 660-023-0030 (Inventory Process)(3). An application for approval of an aggregate site following sections (4) and (6) of this rule shall be adequate if it provides sufficient information to determine whether the requirements in those sections are satisfied. An application for a PAPA concerning a significant aggregate site following sections (3) and (5) of this rule shall be adequate if it includes:

(a)

Information regarding quantity, quality, and location sufficient to determine whether the standards and conditions in section (3) of this rule are satisfied;

(b)

A conceptual site reclamation plan;
NOTE: Final approval of reclamation plans resides with DOGAMI rather than local governments, except as provided in ORS 517.780 (Effect on county zoning laws or ordinances)

(c)

A traffic impact assessment within one mile of the entrance to the mining area pursuant to section (5)(b)(B) of this rule;

(d)

Proposals to minimize any conflicts with existing uses preliminarily identified by the applicant within a 1,500 foot impact area; and

(e)

A site plan indicating the location, hours of operation, and other pertinent information for all proposed mining and associated uses.

(9)

Local governments shall amend the comprehensive plan and land use regulations to include procedures and requirements consistent with this rule for the consideration of PAPAs concerning aggregate resources. Until such local regulations are adopted, the procedures and requirements of this rule shall be directly applied to local government consideration of a PAPA concerning mining authorization, unless the local plan contains specific criteria regarding the consideration of a PAPA proposing to add a site to the list of significant aggregate sites, provided:

(a)

Such regulations were acknowledged subsequent to 1989; and

(b)

Such regulations shall be amended to conform to the requirements of this rule at the next scheduled periodic review after September 1, 1996, except as provided under OAR 660-023-0250 (Applicability)(7).

Source: Rule 660-023-0180 — Mineral and Aggregate Resources, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=660-023-0180.

Last Updated

Jun. 8, 2021

Rule 660-023-0180’s source at or​.us