OAR 333-113-0145
Equipment Control: Inspection and Maintenance

(1)

Each licensee or registrant must conduct, at intervals not to exceed six months, a visual check of source holders, logging tools, source handling tools, storage containers, transport containers and injection tools to ensure proper labeling and physical condition. Records of inspection and maintenance must be maintained in accordance with 333-100-0057 (Maintenance of Records).

(2)

If any inspection conducted pursuant to section (1) of this rule reveals defects or damage to labeling or components, the device must be removed from service until repairs have been made.

(3)

If a sealed source is stuck in the source holder, the licensee must not perform any operation, such as drilling, cutting or chiseling, on the source holder unless the licensee is specifically approved by the U.S. Nuclear Regulatory Agency, an Agreement State or a Licensing State to perform this operation.

(4)

The repair, opening or modification of any sealed source must be performed only by persons specifically authorized to do so by the Authority, the U.S. Nuclear Regulatory Agency, an Agreement State or a Licensing State.

(5)

Removal of a sealed source from a source holder or logging tool, and maintenance on sealed sources or holders in which sealed sources are contained may not be performed by the licensee unless a written procedure has been developed and approved either by the Authority, the Nuclear Regulatory Agency or by an Agreement State or a Licensing State.

Source: Rule 333-113-0145 — Equipment Control: Inspection and Maintenance, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=333-113-0145.

333‑113‑0001
Purpose and Scope 333‑113‑0005
Definitions 333‑113‑0007
Specific Licenses For Well Logging 333‑113‑0010
Agreement With Well Owner of Operator 333‑113‑0101
Equipment Control: Limits on Levels of Radiation 333‑113‑0105
Equipment Control: Storage Precautions 333‑113‑0110
Equipment Control: Transport Precautions 333‑113‑0115
Equipment Control: Radiation Survey Instruments 333‑113‑0120
Equipment Control: Leak Testing of Sealed Sources 333‑113‑0125
Equipment Control: Physical Inventory 333‑113‑0130
Equipment Control: Utilization Records 333‑113‑0135
Equipment Control: Design, Performance and Certification Criteria for Sealed Sources 333‑113‑0140
Equipment Control: Labeling 333‑113‑0145
Equipment Control: Inspection and Maintenance 333‑113‑0150
Equipment Control: Use of a Sealed Source in a Well without a Surface Casing 333‑113‑0201
Requirements for Personnel Safety: Training Requirements 333‑113‑0203
Requirements for Personnel Safety: Subjects to be Included in Training Courses for Logging Supervisors 333‑113‑0205
Requirements for Personnel Safety: Operating and Emergency Procedures 333‑113‑0210
Requirements for Personnel Safety: Personnel Monitoring 333‑113‑0301
Precautionary Procedures in Logging and Subsurface Tracer Studies: Security 333‑113‑0305
Precautionary Procedures in Logging and Subsurface Tracer Studies: Handling Tools 333‑113‑0310
Precautionary Procedures in Logging and Subsurface Tracer Studies: Subsurface Tracer Studies 333‑113‑0315
Precautionary Procedures in Logging and Subsurface Tracer Studies: Particle Accelerators 333‑113‑0325
Precautionary Procedures in Logging and Subsurface Tracer Studies: Energy Compensation Source 333‑113‑0335
Precautionary Procedures in Logging and Subsurface Tracer Studies: Tritium Neutron Generator Target Source 333‑113‑0401
Radiation Surveys 333‑113‑0403
Radiation Surveys and Records: Radioactive Contamination Control 333‑113‑0405
Radiation Surveys and Records: Documents and Records Required at Field Stations 333‑113‑0410
Radiation Surveys and Records: Documents and Records Required at Temporary Jobsites 333‑113‑0501
Notification of Incidents, Abandonment and Lost Sources
Last Updated

Jun. 8, 2021

Rule 333-113-0145’s source at or​.us