OAR 340-240-0150
Hardboard Manufacturing Plants

(1)

Emissions from hardboard plants excluding press vents. No person may cause or permit the total emissions of particulate matter from a hardboard plant, excluding press/cooling vents, to exceed 0.25 pounds per 1,000 square feet of hardboard produced on a 1⁄8" basis of finished product equivalent.

(2)

Emissions from hardboard plants including press vents. No person is allowed to cause or permit the total emissions of particulate matter from a hardboard plant, including press/cooling vents, to exceed 0.55 pounds per 1,000 square feet of hardboard produced on a 1⁄8" basis of finished product equivalent.

(3)

When calculating emissions for this rule, emissions from truck dump and storage areas, fuel burning equipment, and refuse burning equipment are not included.
NOTE: This rule is included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-200-0040 (State of Oregon Clean Air Act Implementation Plan).

Source: Rule 340-240-0150 — Hardboard Manufacturing Plants, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=340-240-0150.

340–240–0010
Purpose 340–240–0020
Emission Limitations 340–240–0030
Definitions 340–240–0050
Compliance Testing Requirements 340–240–0100
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Applicability 340–240–0110
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wood Waste Boilers 340–240–0120
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Veneer Dryer Emission Limitations 340–240–0130
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Air Conveying Systems (Medford-Ashland AQMA Only) 340–240–0140
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wood Particle Dryers at Particleboard Plants 340–240–0150
Hardboard Manufacturing Plants 340–240–0160
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wigwam Waste Burners 340–240–0180
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Control of Fugitive Emissions (Medford-Ashland AQMA Only) 340–240–0190
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Requirement for Operation and Maintenance Plans (Medford-Ashland AQMA Only) 340–240–0210
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Continuous Monitoring 340–240–0220
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Source Testing 340–240–0250
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Open Burning 340–240–0300
La Grande Urban Growth Area: Applicability 340–240–0320
La Grande Urban Growth Area: Wood-Waste Boilers 340–240–0330
La Grande Urban Growth Area: Wood Particle Dryers at Particleboard Plants 340–240–0340
La Grande Urban Growth Area: Hardboard Manufacturing Plants 340–240–0350
La Grande Urban Growth Area: Air Conveying Systems 340–240–0360
La Grande Urban Growth Area: Fugitive Emissions 340–240–0400
Lakeview Urban Growth Area: Applicability 340–240–0410
Lakeview Urban Growth Area: Control of Fugitive Emissions 340–240–0420
Lakeview Urban Growth Area: Requirement for Operation and Maintenance Plans 340–240–0430
Lakeview Urban Growth Area: Source Testing 340–240–0440
Lakeview Urban Growth Area: Open Burning 340–240–0500
Klamath Falls Nonattainment Area: Applicability 340–240–0510
Klamath Falls Nonattainment Area: Opacity Standard 340–240–0520
Klamath Falls Nonattainment Area: Control of Fugitive Emissions 340–240–0530
Klamath Falls Nonattainment Area: Requirement for Operation and Maintenance Plans 340–240–0540
Klamath Falls Nonattainment Area: Compliance Schedule for Existing Industrial Sources 340–240–0550
Klamath Falls Nonattainment Area: Requirements for New Sources When Using Residential Wood Fuel-Fired Device Offsets 340–240–0560
Klamath Falls Nonattainment Area: Real and Permanent PM2.5 and PM10 Offsets 340–240–0570
Klamath Falls Nonattainment Area Contingency Measures: Applicability 340–240–0580
Klamath Falls Nonattainment Area Contingency Measures: Existing Industrial Sources Control Efficiency 340–240–0610
Klamath Falls Nonattainment Area Contingency Measures: Continuous Monitoring for Industrial Sources 340–240–0620
Klamath Falls Nonattainment Area Contingency Measures: Contingency Measures: New Industrial Sources 340–240–0630
Klamath Falls Nonattainment Area Contingency Measures: Contingency Enhanced Curtailment of Use of Solid Fuel Burning Devices and Fireplaces
Last Updated

Jun. 8, 2021

Rule 340-240-0150’s source at or​.us