OAR 340-240-0410
Lakeview Urban Growth Area: Control of Fugitive Emissions


(1)

All sawmills, plywood mills and veneer manufacturing plants, particleboard and hardboard plants, asphalt plants, stationary rock crushers, and sources subject to OAR 340-240-0420 (Lakeview Urban Growth Area: Requirement for Operation and Maintenance Plans) must prepare and implement site-specific plans for the control of fugitive emissions.

(2)

Fugitive emission control plans must identify reasonable measures to prevent particulate matter from becoming airborne. Such reasonable measures must include, but not be limited to, the following:

(a)

Scheduled application of water or other suitable chemicals on unpaved roads, log storage or sorting yards, materials stockpiles, and other surfaces which can create airborne dust;

(b)

Full or partial enclosure of materials stockpiled in cases where application of water, or chemicals are not sufficient to prevent particulate matter from becoming airborne;

(c)

Installation and use of hoods, fans, and fabric filters to enclose and vent the handling of dusty materials;

(d)

Adequate containment during sandblasting or other similar operations;

(e)

Covering, at all times when in motion, open bodied trucks transporting materials likely to become airborne; and

(f)

Procedures for the prompt removal from paved streets of earthen material, dirt, dust, or other material which does or may become airborne.
NOTE: This rule is included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-200-0040 (State of Oregon Clean Air Act Implementation Plan).

Source: Rule 340-240-0410 — Lakeview Urban Growth Area: Control of Fugitive Emissions, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=340-240-0410.

340‑240‑0010
Purpose
340‑240‑0020
Emission Limitations
340‑240‑0030
Definitions
340‑240‑0050
Compliance Testing Requirements
340‑240‑0100
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Applicability
340‑240‑0110
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wood Waste Boilers
340‑240‑0120
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Veneer Dryer Emission Limitations
340‑240‑0130
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Air Conveying Systems (Medford-Ashland AQMA Only)
340‑240‑0140
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wood Particle Dryers at Particleboard Plants
340‑240‑0150
Hardboard Manufacturing Plants
340‑240‑0160
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Wigwam Waste Burners
340‑240‑0180
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Control of Fugitive Emissions (Medford-Ashland AQMA Only)
340‑240‑0190
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Requirement for Operation and Maintenance Plans (Medford-Ashland AQMA Only)
340‑240‑0210
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Continuous Monitoring
340‑240‑0220
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Source Testing
340‑240‑0250
Medford-Ashland Air Quality Maintenance Area and Grants Pass Urban Growth Area: Open Burning
340‑240‑0300
La Grande Urban Growth Area: Applicability
340‑240‑0320
La Grande Urban Growth Area: Wood-Waste Boilers
340‑240‑0330
La Grande Urban Growth Area: Wood Particle Dryers at Particleboard Plants
340‑240‑0340
La Grande Urban Growth Area: Hardboard Manufacturing Plants
340‑240‑0350
La Grande Urban Growth Area: Air Conveying Systems
340‑240‑0360
La Grande Urban Growth Area: Fugitive Emissions
340‑240‑0400
Lakeview Urban Growth Area: Applicability
340‑240‑0410
Lakeview Urban Growth Area: Control of Fugitive Emissions
340‑240‑0420
Lakeview Urban Growth Area: Requirement for Operation and Maintenance Plans
340‑240‑0430
Lakeview Urban Growth Area: Source Testing
340‑240‑0440
Lakeview Urban Growth Area: Open Burning
340‑240‑0500
Klamath Falls Nonattainment Area: Applicability
340‑240‑0510
Klamath Falls Nonattainment Area: Opacity Standard
340‑240‑0520
Klamath Falls Nonattainment Area: Control of Fugitive Emissions
340‑240‑0530
Klamath Falls Nonattainment Area: Requirement for Operation and Maintenance Plans
340‑240‑0540
Klamath Falls Nonattainment Area: Compliance Schedule for Existing Industrial Sources
340‑240‑0550
Klamath Falls Nonattainment Area: Requirements for New Sources When Using Residential Wood Fuel-Fired Device Offsets
340‑240‑0560
Klamath Falls Nonattainment Area: Real and Permanent PM2.5 and PM10 Offsets
340‑240‑0570
Klamath Falls Nonattainment Area Contingency Measures: Applicability
340‑240‑0580
Klamath Falls Nonattainment Area Contingency Measures: Existing Industrial Sources Control Efficiency
340‑240‑0610
Klamath Falls Nonattainment Area Contingency Measures: Continuous Monitoring for Industrial Sources
340‑240‑0620
Klamath Falls Nonattainment Area Contingency Measures: Contingency Measures: New Industrial Sources
340‑240‑0630
Klamath Falls Nonattainment Area Contingency Measures: Contingency Enhanced Curtailment of Use of Solid Fuel Burning Devices and Fireplaces
Last Updated

Jun. 8, 2021

Rule 340-240-0410’s source at or​.us