OAR 918-674-0033
Specific Use Structures

Unless stated otherwise within this rule, this rule is applied retroactively from July 1, 2010.

(1)

When it can be demonstrated that compliance with strict requirements of the Oregon Structural Specialty Code or the Oregon Residential Specialty Code are impractical and the intent and purpose of the code can still be met without causing structural failure or risk of fire in employee protection only structures, equipment protection only structures, recreational use structures, and food service structures, the requirements of the code may be modified by the building official charged with administration of the prefabricated structures program.

(2)

All new or converted food service structures shall provide required fire-resistive construction and suppression equipment including the structural elements necessary for any mechanical installations.

(3)

The division may waive the formal plan review process required in the Oregon Structural Specialty Code or the Oregon Residential Specialty Code for specific use structures if the plans are prepared by an Oregon registered architect or engineer and it is found that the nature of the work applied for is such that plan review is not necessary to obtain minimum compliance with the code.

(4)

If the division determines the work in a specific use structure is not of a highly technical nature and there is no unreasonable risk to life and safety, plans required by the Oregon Structural Specialty Code or the Oregon Residential Specialty Code may be prepared by a person who is not an Oregon registered architect or engineer.

(5)

Specific use structures are exempt from the exterior envelope requirements of the Oregon Energy Efficiency Specialty Code provided the roof/ceiling assembly meets the prescriptive requirements of the code and the center of non-bullet-resistant window glass has a minimum U-factor of .35.

(6)

Equipment protection only structures are exempt from all of the envelope requirements of the Oregon Energy Efficiency Specialty Code.
[Publications: Publications referenced are available from the agency.]

Source: Rule 918-674-0033 — Specific Use Structures, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=918-674-0033.

918‑674‑0000
Application, Scope and Purpose 918‑674‑0005
Definitions 918‑674‑0013
Manufacturer Registration 918‑674‑0015
Responsibility for Services 918‑674‑0023
Codes and Standards 918‑674‑0025
Plumbing Exception 918‑674‑0033
Specific Use Structures 918‑674‑0038
Installations 918‑674‑0043
Reciprocity 918‑674‑0055
Inspections 918‑674‑0057
Alternative Inspection Pilot Program 918‑674‑0060
Compliance Control Programs 918‑674‑0065
Plan Requirements 918‑674‑0075
Out-of-State Applicant 918‑674‑0085
Plan Approval, Renewal and Expiration 918‑674‑0090
Changes to Approved Plans 918‑674‑0095
Transfer of Approvals 918‑674‑0100
Change of Name or Address, or Ownership 918‑674‑0105
Production Discontinued by Manufacturer 918‑674‑0115
Compliance and Right of Entry 918‑674‑0125
Proprietary Material 918‑674‑0130
Insignia(s) of Compliance Required 918‑674‑0135
Lost or Damaged Insignia of Compliance 918‑674‑0145
Unit Identification 918‑674‑0150
Components 918‑674‑0155
State Fees 918‑674‑0200
Third-Party Inspection and Plan Review 918‑674‑0210
Third-Party Certification Application 918‑674‑0220
Inspector Certification Requirements 918‑674‑0230
Insurance Requirements 918‑674‑0240
Conflict of Interest and Collusion 918‑674‑0250
Contractual Agreements 918‑674‑0260
Third-Party Certification Renewal 918‑674‑0270
Revocation of Third-Party Certification and Appeal Process 918‑674‑0280
Record Keeping Requirements 918‑674‑0290
Reporting Requirements 918‑674‑0300
Monitoring of Third Parties
Last Updated

Jun. 8, 2021

Rule 918-674-0033’s source at or​.us