OAR 918-674-0000
Application, Scope and Purpose


(1)

Application. The provisions of OAR 918-674-0000 (Application, Scope and Purpose) through 918-674-0300 (Monitoring of Third Parties) shall apply to all prefabricated structures other than a manufactured dwelling as defined under ORS 446.003 (Definitions for ORS 446.003 to 446.200 and 446.225 to 446.285 and ORS chapters 195, 196, 197, 215 and 227).

(2)

Purpose. The purpose of these rules is to provide uniform, minimum procedures for plan approval and inspection for the regulation of structures or portions thereof, that are wholly or partially prefabricated using closed construction at an off-site location.

(3)

Scope. These rules shall apply to the design and construction of all prefabricated structures that are intended to be sold, leased or installed in Oregon.
[Publications: Publications referenced are available from the agency.]

Source: Rule 918-674-0000 — Application, Scope and Purpose, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=918-674-0000.

918–674–0000
Application, Scope and Purpose
918–674–0005
Definitions
918–674–0013
Manufacturer Registration
918–674–0015
Responsibility for Services
918–674–0023
Codes and Standards
918–674–0025
Plumbing Exception
918–674–0033
Specific Use Structures
918–674–0038
Installations
918–674–0043
Reciprocity
918–674–0055
Inspections
918–674–0057
Alternative Inspection Pilot Program
918–674–0060
Compliance Control Programs
918–674–0065
Plan Requirements
918–674–0075
Out-of-State Applicant
918–674–0085
Plan Approval, Renewal and Expiration
918–674–0090
Changes to Approved Plans
918–674–0095
Transfer of Approvals
918–674–0100
Change of Name or Address, or Ownership
918–674–0105
Production Discontinued by Manufacturer
918–674–0115
Compliance and Right of Entry
918–674–0125
Proprietary Material
918–674–0130
Insignia(s) of Compliance Required
918–674–0135
Lost or Damaged Insignia of Compliance
918–674–0145
Unit Identification
918–674–0150
Components
918–674–0155
State Fees
918–674–0200
Third-Party Inspection and Plan Review
918–674–0210
Third-Party Certification Application
918–674–0220
Inspector Certification Requirements
918–674–0230
Insurance Requirements
918–674–0240
Conflict of Interest and Collusion
918–674–0250
Contractual Agreements
918–674–0260
Third-Party Certification Renewal
918–674–0270
Revocation of Third-Party Certification and Appeal Process
918–674–0280
Record Keeping Requirements
918–674–0290
Reporting Requirements
918–674–0300
Monitoring of Third Parties
Last Updated

Jun. 8, 2021

Rule 918-674-0000’s source at or​.us